Gait up Physilog 5 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos analíticos Gait up Physilog 5. Gait up Physilog 5 17 páginas.
Também para Gait up Physilog 5: Manual do utilizador (12 páginas), Manual do utilizador (17 páginas)

Imprimir página

5.3. How to update Date and Time of the Physilog®5

Via computer:



Create a new text file on the Desktop of your computer or directly on the Physilog® sensor (on

Windows: right click, new>text file, on Mac: open text editor and save file as textfile)



Leave it empty and rename it to TIME (complete name with file extension: TIME.txt)



Copy-paste the file to the Physilog® if you saved it on the Desktop



Disconnect the Physilog® from the computer to update the time and date to the hour when the

file has been created

Create a new text file each time you update the date, do not just rename or modify an existing

TIME.txt file (TIME.txt file previously created will update to the date it was created, so in the past).

The TIME.txt file will disappear from Physilog's memory when disconnecting the Physilog® from the

computer, therefore it is normal to not find it the next time you open the Physilog® on the computer.

Via Android application:

Connect the Physilog® to the Android companion application inside the "Physilog Measure" mode.

Start a short measurement from the app, you can stop the measurement as soon as the stop button

is available. Wait until the file transfer is finished and the app shows the green checkmark. Then

disconnect the sensors or completely quit the app.

5.4. How to update firmware of Physilog®5 with nRF Connect

The firmware is updated via Bluetooth. Therefore, install the nRF application on a mobile or tablet

(Android or iOS) and follow the steps below. It may be necessary to install a file manager application

in addition to the nRF app to be able to select the firmware file from a chosen location of file storage

on your device.

Android



Install the "nRF Connect for Mobile" app on the Android device



Download the latest firmware version from the email to the Android

device



Open the nRF Connect app and enable all necessary permissions

(Bluetooth and Position, see pictures below)



Go to Scanner tab and scan for surrounding Physilog (shortly push the

main button of the Physilog®5 to enter detection mode)



Select connect of one Physilog®5 sensor in the list



Plug the selected Physilog to a power source to be sure to have enough

battery to perform the update

Physilog5 user manual v1.2.6 Date: 19.06.2018

EPFL Innovation Park, Bat C. CH-1015 Lausanne

TVA CHE-145.136.760

Gait Up SA