Gait up PhysiRun Lab Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Instrumentos analíticos Gait up PhysiRun Lab. Gait up PhysiRun Lab 17 páginas.

2.5 Protocol

Before starting a measurement, it's important to respect a protocol which allows to get

precise results with PhysiRun Lab. Each measurement must have a static period (flat foot

without any movement). This period is essential for PhysiRun Lab analysis to calibrate the

sensor (manually or automatically) before the analysis.

WARNING: During automatic analysis, every step is analysed. For example, if you

did a part of walking during the measure and you include this part in the analysis

the results could be biased.

WARNING: Before starting a measurement, please carefully read part 2.

To obtain an analysable file, you have to do a measurement with Physilog

this file by starting the device with the watch, the application or the sensors directly. For

each method your measurement files (.BIN) are saved in the sensor memory (8Go). A file

contains the raw data. Below you can check the name description:

A measurement from the watch allows to start and stop the Physilog

a radius of 3 meters approximately).

Required material:

• Watch

• 2 Physilog

—Open the application "Remote watch" already installed on the watch.

—To connect your sensors to the watch, press the button on each sensor briefly (<1s).

Connection between watch and sensor is automatically done after few seconds. Check that

the watch app went from Connecting to Connected, as shown in the picture below.

NOTE: If the watch does not detect the sensor, you can do a soft reset by holding

the main button of the sensors for 10 seconds.

User guide PhysiRun Lab - v1.1.1 Date: 06.05.2019

EPFL Innovation Park, Bat C. CH-1015 Lausanne

5 by Bluetooth (within

Gait Up SA

www.gaitup.com

TVA CHE-145.136.760

5. You can obtain