GaitKeeper GKmini Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Equipamento médico GaitKeeper GKmini. GaitKeeper GKmini 15 páginas. Walking surface
Imprimir página
1. Assembly Instructions
Assembly instructions
Basic Guidelines for Setting Up Your Treadmill
After removing the treadmill from the packaging, place your treadmill on a clean, level surface. Make sure the electrical cord
easily reaches a grounded three-pronged outlet . Do not allow the treadmill assembly to rest on the cord.
Important Electrical Requirements – 110V—240V
Your GaitKeeper™ treadmill requires a110 volt—240V Alternating current (AC), 15 amp (110V) 8 Amp (240V) grounded outlet circuit.
This means nothing else can be plugged into the same circuit.
Danger: Do not use an extension cord or ungrounded outlet.
The ground helps prevent electrical damage to your treadmill and enhances your safety by helping to prevent shock. Check with a
qualified electrician or serviceman if you are in doubt as to whether the treadmill is properly grounded.
Do not modify the plug provided with the treadmill if it will not fit the outlet. Have a proper outlet installed by a qualified electrician.
Component Checklist
ITEM
DESCRIPTION
A
Walking Surface
B
Hand Set
C
Magnetic Safety Key
D
Power Cord
E
Walker-Style Handlebars
B
litegait.com / 800.332.WALK / 480.829.1727
QTY
1
1
1
1
1
C
A
D
4
E