dB Technologies a2ti Manual do utilizador de início rápido - Página 3
Procurar online ou descarregar pdf Manual do utilizador de início rápido para Amplificador dB Technologies a2ti. dB Technologies a2ti 4 páginas. Professsional 2-channell power amplifier
Imprimir páginaINPUT SENSITIVITY / OUTPUT MODE
The user can select the input sensitivity and the output mode of the amplifier.
The input sensitivity can be selected from (0.775 V, 1 V, 32 dB), depending on the charaterisctics of the
source.
The amplifier can operate in three different modes:
- brigde (combines two input signal into one output signal to reach a higher power rating)
- parallel (route one input signal two both the outputs)
- stereo (the default mode, CH1 input is routed in CH1 output, CH2 input is routed in CH2 output)
See the upper table and the main tech specs for a further explanation.
FIRST TURN ON
•
Connect the passive loudspeakers, using cables with speakON connectors (4-5 outputs), depending on
impedance, max rated power, and amplifier mode. Select the amplifier MODE (5).
•
Connect the inputs, using balanced cables with XLR connectors (6-7 input). Select the inputs
sensitivity (4).
•
If needed, link the input LINK connectors, to relaunch the signal to a second amplifier.
•
Set the level knobs (8, 9) to the minimum level.
•
Connect the mains cable (socket 1), turn on the amplifier (11).
•
Adjust the level knobs (8, 9), while the audio signal comes from your source.
a2ti
420120318Q REV.1.4