Gako PM140 Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Equipamento de laboratório Gako PM140. Gako PM140 16 páginas.
Imprimir página10.
After the operation is completed,
open the lid to remove the PM jar.
5. Safety Shutdown
• The safety shutdown protects individuals from injury and the device from damage.
• Any attempt against the opening of the lid during mixing procedures leads to an immediate safety
shutdown, which may lead to mechanical damage to the device and requires customer service support.
• Mixing procedures are immediately interrupted and stopped when pressing START.
6. Maintenance
6.1. Cleaning
• Clean the surface with a soft fabric or cloth soaked
with warm water and a non-abrasive
household cleaning agent.
• Afterward, wipe the surface with another soft fabric
or cloth soaked with warm water and clear it.
• In the end, rapidly wipe the entire surface with a dry
cotton cloth or towel.
6.2. Operational Error
Error
Insufficient mixture quality
Uncombined powder after mixing
Processing and segregation
time too short
Powder residues in PM jar holder
The PM jar cannot be lifted easily from
the PM jar holder
11.
Place the PM jar holder on the table.
• Heavy scaling may be cleaned with a standard liquid
cleanser.
• Do not use scratching sponges or abrasive cleaning
agents such as nitro or synthetic resin thinner.
• Since it may cause irreparable damage, ensure
no fluids enter the device.
• Use mild surface disinfectants.
• Do not use thermal disinfection.
Troubleshooting
Short mixing time
The expiry date of the mixture passed
Humid powder
Mixing time set too long
The PM jar is not closed properly
Powder residues in the PM jar holder
10
12.
By holding the PM jar holder, take the
PM jar out of it while turning slightly
clockwise and pulling out.
Solution
Adjust mixing-time
Observe expiry date
Store the powder according to the
manufacturer's instruction
Shorten mixing time
Close PM jar properly
Clean PM jar holder, observe proper
closing of PM jar