Dynamic Engineering PCIe8LXMCX2 Manual do utilizador - Página 8
Procurar online ou descarregar pdf Manual do utilizador para Adaptador Dynamic Engineering PCIe8LXMCX2. Dynamic Engineering PCIe8LXMCX2 17 páginas. Pcie 8 lane 2 position xmc compatible carrier, with pmc/scsi rear io connector
Imprimir páginaOptions
Dynamic Engineering offers multiple versions of the PCIe8LXMCX2design.
In addition to the basic bridged version there are options for Ethernet, Fan, Serial ports,
and minimization.
The PCIe8LXMCX2 features cooling cutouts designed to support the addition of a fan in
one or two positions for each XMC. On PrXMC's and other XMC's with high thermal
loads the fan option is a good idea. On cards with a lower thermal profile the fan is not
needed. The fan produces 5 CFM in a small area to create a high LFM rating suitable
for most cooling requirements. The fan used has a relatively low noise rating for quiet
operation. Position 1 is closest to the PCI bezel and position 2 is closer to the XMC
connectors. For position 3 and position 4 locations continue counting left to right.
Some XMC's support Ethernet connections over the J04 connector with pins specified
by the PICMG standard 2.15. PCIe8LXMCX2 supports Ethernet capable cards with an
optional two-position RJ45 connector on the top edge of the card. Slot 0 has this
option.
Some XMC's support serial channels on J04 with pins specified by by PICMG standard
2.15. PCIe8LXMCX2 supports serial capable cards with an optional pair of header
connectors. Slot 0 has this option.
In addition PCIe8LXMCX2 has two options for Jn4/Jn6 signal routing. VME style 2x32
pin header [shown] or a SCSI style connector.
Please mix and match options, as you need them.
Embedded Solutions
Page 8