Autometers Systems A-400P Brochura de programação e instalação - Página 10

Procurar online ou descarregar pdf Brochura de programação e instalação para Instrumentos de medição Autometers Systems A-400P. Autometers Systems A-400P 17 páginas. Mid approved sgs.uk appendix b and d, measures kwh, kvarh, kvar,pf,hz, max demand, rs 485 modbus autometers v6 protocol, two pulse outputs, bi- directional measurement for import and export, back light lcd for full viewing angles, available as 1 phase 2 w

Imprimir página

4.6.2 Pulse Duration

The pulse width can be selected as 200 (non-MID version meters only), 100 (default) or
60ms.
4.7 Communication
Where the meter has been supplied with a Rs 485 protocol output the individual
parameters are set by using the front key panel.
4.7.1 Modbus RS 485 Address
4.7.2 Mbus address
*A-400MB only
9
(It shows pulse width of 200ms)
From the set-up menu, use
option.
E
Press
to enter the selection routine. The current setting will flash.
Use
MD/
and
P
PF/HZ
entry procedure, press
return to the main set up menu.
(The range is from 001 to 247)
From the set-up menu, use
E
Press
button to enter the selection routine. The current setting will
be flashing.
MD/
Use
and
P
PF/HZ
On completion of the entry procedure, press
V/A
setting and press
ESC
(The range is from 001 to 247)
From the set-up menu, use
E
Press
button to enter the selection routine. The current setting will
be flashing.
Secondary address:
00 00 00 01 to 99 99 99 99
and
MD/
P
PF/HZ
buttons to choose pulse rate. On completion of the
E
to confirm the setting and press
MD/
and
P
PF/HZ
buttons to choose Modbus address (001 to 247).
button to return the main set-up menu.
MD/
and
P
PF/HZ
www.autometers.co.uk
buttons to select the Pulse width
buttons to select the address ID.
E
button to confirm the
buttons to select the address ID.
V/A
to
ESC