Hidrotermal Hidro-SW300 Manual de instalação e manutenção - Página 4
Procurar online ou descarregar pdf Manual de instalação e manutenção para Iluminação subaquática Hidrotermal Hidro-SW300. Hidrotermal Hidro-SW300 4 páginas. Wall mounted underwater light
3. RGB Light Color Control Operation
16 pre-programmed color modes of RGB light:
BLUE: static blue
1
GREEN: static green
3
BG: static cyan-blue
5
RGB: static white
7
R-RG-G slow animation
9
11
B-BR-R slow animation
13
R-G-B fast animation
G-RB-B-R-RGB-GB-RG
15
Remark: When the lights without internal controller option,
the light programs will keep changing by fixed automatic cycle switch.
RGB Operation:
1. Any of the 16 modes can be selected with the ON/OFF switch of your pool lights.
2. Turn the light ON.
3. The 16 color modes will begin to run automatically.
4. To change the color, turn the light OFF and then ON within 15 seconds. Continue turning
OFF and ON until the desired light color mode is reached. When the light is turned OFF for
more than 1.5 seconds, it will return to the beginning of the color cycle (mode 0).
Remote Controller Options: There are 3 optional control ways
1) Power switch control, 2) Remote control (Hidro-CTRL), 3) synchrostep remote control
The color modes can also be selected with the controller. One remote control device can
be adapted to 30 pool lights simultaneously within 100 meters.
4. Maintenance and Replacement
1. There is no maintenance required for this light. It is designed to be used only once,
meaning that replacement is necessary if it becomes defective. The repairing is impossible.
2. Before servicing the light, always disconnect the power of the circuit breaker. Make sure
there is NO power supplied to the light.
3. To replace the light, unfasten it from the bracket. Make sure the new light is the same
switch.
5. Warranty
1. The manufacturer warrants this led underwater light against defect in materials and
workmanship for a period of two (2) years from the date of purchase.
2. This warranty is limited to the first retail purchaser, it is not transferable, and does not
apply to products that have been moved from their original installation sites. This warranty
does not cover failures or malfunctions from improper installation and/or operation.
3. The manufacturer is not responsible in any circumstances for assembly, installation or
start-up of any electric components which have been inserted or handled at locations other
than its own premises.
4. The liability of the manufacturer shall not exceed the repair or replacement of defective
parts. It specifically excludes liability for direct, incidental or consequential damages.
RED: static red
2
RB: static purple
4
RG: static yellow
6
RGB change gradually to G/R/B
8
G-GB-B slow animation
10
12
RG-GB-BR slow animation
14
R-B-G fast animation
R-G-B slow animation
16
3