Celestron VistaPix 72212 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Celestron VistaPix 72212. Celestron VistaPix 72212 12 páginas. 8x32 binocular & digital camera
Também para Celestron VistaPix 72212: Manual do utilizador (12 páginas)

Imprimir página
Celestron VistaPix 72212 Manual do utilizador

5. How to use the binocular

To adjust the eye-relief for eyeglass wearers: Fold down the rubber eyecups
and place them against your glasses to get the best viewing result.
Adjusting the eyepieces
The distance between your eyes is called interpupillary distance.
The interpupillary distance is different from one person to another.
It is important to adjust your interpupillary distance before using the VistaPix:
- Hold VistaPix firmly in the normal viewing position.
- Adjust the barrels by pushing together or pulling apart until you see a single
circular image with both of your eyes.
Focusing the Binocular
A. Set the Diopter Knob on underside of VistaPix to its center point between
- and + .
B. Choose an object that is at least 15 meters (49 ft) away.
C. Looking with just your left eye, rotate the Center Focus Knob(2) until the object
you are viewing is in best focus.
D. Looking with just your right eye, rotate the Diopter Knob(1) until the object you
are viewing is in best focus.
E. Viewing your object with both eyes, turn the Center Focus Knob to bring it in
best focus.
P .10
Resolution Adjustment
Select "Resolution" and press OK Button.
and press OK button
to change the image resolution. Indicates 0.3MP,
indicates 2.0MP, and
indicates 3.0MP on the LCD screen.
SETUP
SETUP
RESOLUTLON
RESOLUTLON
Resolution
Resolution
3.0M
3.0M
Exposure value
Exposure value
2.0M
2.0M
Date/Time
Date/Time
0.3M
0.3M
TV out
TV out
Time stamp
Time stamp
Exposure Value
Select "Exposure value" and press the OK button.
the exposure setting suggested by the camera. Press the Up or Down button
to select a value between -1.5 and 1.5 and press OK button
exposure value. Negative exposure values tend to underexpose (darken) your
object while positive values will overexpose (brighten) the object.
SETUP
SETUP
EV
EV
Resolution
Resolution
0.0
0.0
Exposure value
Exposure value
Date/Time
Date/Time
TV out
TV out
Time stamp
Time stamp
Setup the Date
Select "Date / Time" and press the OK button
the correct date (y/m/d) and time (h/m/s) by pressing the Up-down button.
Press the OK button
again to complete the setting.
SETUP
SETUP
Date/Time
Date/Time
Resolution
Resolution
2004 01 31
2004 01 31
Exposure value
Exposure value
24:00:01
24:00:01
Date/Time
Date/Time
TV out
TV out
Time stamp
Time stamp
TV-out Display Mode
Select "TV out" and press OK button.
(NTSC for United States or PAL for Europe) and press OK button
complete setting.
SETUP
SETUP
TV OUT
TV OUT
Resolution
Resolution
NTSC
NTSC
Exposure value
Exposure value
PAL
PAL
Date/Time
Date/Time
TV out
TV out
Time stamp
Time stamp
Choose the desired resolution
This allows you to change
to accept the
EV
EV
0.6
0.6
to set the internal clock. Edit
Choose the corresponding output
to
P .7