Automotive Tazer JL Mini Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Equipamento de diagnóstico Automotive Tazer JL Mini. Automotive Tazer JL Mini 14 páginas. For jeep wrangler jl & gladiator jt 2018-2020

Imprimir página

This section explains how to use the Tazer JL Mini's live functions – these are

activated with the same button presses as the Settings Menu, but

RUNNING. These features

note that AutoSport, Trac Kill, and StMode will be enabled after initial setup.

• Light Show: This is one method of activating

the light shows. Selecting this will activate

the first show, unless ZPU was used to

change the startup show. There are 9 light

shows – you can toggle through all 9, then

back to OFF.

• Set In-Motion Nav: If set ON, this adds the

ability for address info to be entered into the

navigation system while vehicle is moving.

This is for the PASSENGER to use. It may be

illegal for the driver to use the navigation

system to enter information while the vehicle

is in motion. It is recommended to leave

this setting OFF, enabling it only when you

need to use it, as it can cause an occasional

radio reboot right after engine start-up. This

will automatically be disabled if TurnCAM is

enabled.

• TurnCAM: If enabled, will automatically turn

on the backup camera if the turn signals are

being used. When this is enabled, In-motion

nav will be disabled.

• Hood Alarm: Turn hood alarm on/off.

Requires that Set Panic is enabled

• Dark Mode: If enabled, turn off all exterior

lights and dash, radio, and shifter lighting.

Live Menu Settings

will only work if the Tazer JL Mini remains plugged

Selecting again, advancing to next menu

item, pressing "screen off", or driving over 5

mph will automatically cancel this mode.

• Video: If selected, will turn on backup camera

input.

• VAC or BOOST: If selected, will display the

Vacuum/Boost Gauge on the EVIC

• 0-30 Timer: When the vehicle is stopped,

this display will change to "start 30". As soon

as the vehicle starts moving, the display will

change to "go to 30" and the timer starts.

When the vehicle reaches 30MPH, the time

will be displayed.

• 0-60 Timer: When the vehicle is stopped,

this display will change to "start 60". As soon

as the vehicle starts moving, the display will

change to "go to 60" and the timer starts.

When the vehicle reaches 60MPH, the time

will be displayed.

• Winch RPM: Use left arrow and cruise +/-

buttons to adjust Winch Mode RPMs, 1300-

200RPM. Use left arrow and cruise on/off to

save the new setting.

• Display Tazer JL Mini Firmware Revision:

Displays the Tazer JL Mini's current firmware

version: "TZ JL: x.x.x." (ie "TZJL:11.2.0")

while the engine is

in. Please