Dynamic Power TriFuel Manual do Proprietário - Página 10
Procurar online ou descarregar pdf Manual do Proprietário para Inversor Dynamic Power TriFuel. Dynamic Power TriFuel 17 páginas. Triple fuel generator. trifuel-red
Imprimir página6. Check that the spark plug washer is in good condition, and thread the spark plug in by hand to prevent cross-
threading.
7. After the spark plug is seated, tighten with a spark plug wrench to compress the washer.
If installing a new spark plug, tighten 1/2turn after the spark plug seats to compress the washer. If reinstalling a used
spark plug, tighten 1/8-1/4 turn after the spark plug seats to compress the washer.
Warning:
The spark plug must be securely tightened. An improperly tightened spark plug can become very hot and could damage
the engine. Never use spark plugs which have an improper heat range.
STORAGE
When transporting the generator, turn the engine switch and the fuel valve OFF. Keep the generator level to prevent fuel
spillage. Fuel vapor or spilled fuel may ignite.
Warning:
Contact with a hot engine or exhaust system can cause serious burns or fires. Let the engine cool before
transporting or storing the generator.
Take care not to drop or strike the generator when transporting. Do not place heavy objects on the generator.
Before storing the unit for an extended period:
1. Be sure the storage area is free of excessive humidity and dust.
2.
Service according to the table below:
STORAGE TIME
Less than 1 month
1 to 2 months
2 months to 1 year
1 year or more
*Use gasoline conditioners that are formulated to extend storage life.
Warning:
Gasoline is extremely flammable and is explosive under certain conditions. Perform task in a well-ventilated area
with the engine stopped. Do not smoke or allow flames or sparks in the area during this procedure.
1. Drain the carburetor by loosening the screw.
2. Drain the gasoline into a suitable container.
3. Change the engine oil
RECOMMENDED SERVICE PROCEDURE TO PREVENT HARD STARTING
No preparation required
Fill with fresh gasoline and add gasoline conditioner*.
Fill with fresh gasoline and add gasoline conditioner*. Drain the carburetor float bowl.
Fill with fresh gasoline and add gasoline conditioner*. Remove the spark plug. Put a
tablespoon of engine oil into the cylinder. Turn the engine slowly with the pull rope to distribute
the oil. Reinstall the spark plug. Change the engine oil.
After removal from storage, drain the stored gasoline into a suitable container, and fill with
fresh gasoline before starting.
9