Celexon HomeCinema Electric Tension screen Manual de Instruções - Página 10
Procurar online ou descarregar pdf Manual de Instruções para Ecrã de projeção Celexon HomeCinema Electric Tension screen. Celexon HomeCinema Electric Tension screen 14 páginas.
Também para Celexon HomeCinema Electric Tension screen: Manual de operação (11 páginas)
Imprimir página
Radio Trigger
Transmitter
Technical data
Voltage:
AC/DC 12 V
Frequency
433.92 MHz + 100 KHz
Voltage transmission: 10 Milliwatt
Distance:
max. 20 m
*The USB to 3.5 mm socket adapter is necessary if the projector does not have a 3.5 mm
trigger socket.
1.
Learning the trigger
Variant 1:
1. Disconnect the screen from the power supply and reconnect it after
10 seconds
2. Press the programming button on the trigger within 5-8 seconds
3. The screen moves up and down briefly, the trigger is paired
Variant 2:
1. Disconnect the screen from the power supply and reconnect it after
10 seconds
2. On the back of the radio remote control under the battery cover,
press the small button twice, it beeps each time you press it
3. Press the programming button on the trigger within 5-8 seconds, it
beeps, then the trigger is connected.
2.
Now plug the transmitter into the projector. Please make sure that the
projector is in standby mode. If your projector does not have a 3.5mm 12V
trigger socket, please use the USB adapter and connect the trigger to a
USB socket.
3.
When the projector is switched on, the transmitter triggers the screen and
the screen extends. As soon as the projector is switched off, the transmit-
ter triggers the screen and the screen retracts. Please note that depending
on the projector and the mode set, the trigger function may only be acti-
vated at the end of the projector's switch-off process.
Programming button
Adapter USB to 3,5 mm jack*
9