Aire Sky Parlor Manual de instruções - Página 11

Procurar online ou descarregar pdf Manual de instruções para Ventilador Aire Sky Parlor. Aire Sky Parlor 17 páginas.

INSTALLING THE LED LIGHT KIT

NOTE: Before starting installation, make sure power is turned off at the circuit breaker.

CAUTION: The light source is designed for this speciﬁc application and can overheat if serviced by untrained

personnel. If any servicing is required, the product should be returned to an authorized service facility for examination

or repair.

Step 1. Remove 1 of the 3 screws from the mounting plate and keep it for future use. Loosen the other 2 screws. (Do not

remove)

Step 2. While holding the LED light kit under the fan motor assembly, make the 2-pin wire connections: (Fig. 17)

- White to white

- Black to black

Step 3. Place the key holes on the LED light kit over the 2 screws previously loosened from the mounting plate, turn LED

light kit until it locks in place at the narrow section of the key holes. Secure by tightening the 2 screws previously

loosened and the one previously removed. (Fig. 17)

MOUNTING PLATE

CONNECTORS

LED LIGHT KIT

SCREWS

FIG. 17