Celina CLASSIC SERIES FRAME Manual do produto - Página 10

Procurar online ou descarregar pdf Manual do produto para Tenda Celina CLASSIC SERIES FRAME. Celina CLASSIC SERIES FRAME 15 páginas. Frame tent sectional
Também para Celina CLASSIC SERIES FRAME: Manual do produto (13 páginas)

Imprimir página

INSTALLATION INSTRUCTIONS

10. Pull the tent top over the frame, lifting up on the fabric or "flapping" it to create a cushion of air.

11. Loosely fasten 2 alligator straps at each corner around the perimeter tubing to secure the tent top.

12. Attach the base plates to the legs (6'8" brown, or 7'8" black), securing with a pin.

13. In windy conditions, locate the downwind side of the tent to lift first; this keeps the wind from catching the tent.

14. Step on the base plate to free both hands and lift one side of the tent frame. Do not lift one corner at a time;

lift the entire side of the tent. Insert corner fittings into the top of the leg, securing with a pin. Insert all pins from

the outside in; this keeps the protruding section of the pin from puncturing the tent fabric.

15. While the tent is still low to the ground fasten the rest of the alligator straps around the perimeter tubing.

16. Repeat with the other side of the tent. When finished with the corner legs, install all other legs at side tee

fitting locations.

17. Center the tent top on the frame by hiding the seams behind the hip rafters and tightening the straps. Guide

excess strap through the metal slide on the alligator clip.

18. Place stakes 5' out from each leg; drive stakes into the ground so that approximately 6" or less of the stake

is showing.

40' x 280' Classic Series Frame Tent

www.GetTent.com / www.CelinaTent.com

PG.10