Autonics BC Series Manual - Página 2

Procurar online ou descarregar pdf Manual para Acessórios Autonics BC Series. Autonics BC Series 7 páginas. Color mark sensor
Também para Autonics BC Series: Manual (7 páginas), Manual do produto (5 páginas)

Imprimir página
Autonics BC Series Manual
BC Series
Control Output Diagram
NPN open collector output
Photoelectric sensor circuit
Output short
overcurrent
prevention
circuit
※ If short-circuit the control output terminal or supply current over the rated specification, normal control signal is not output due to the output
short over current protection circuit.
Connections for Connector Part
M12 Connector Pin

Operation Mode

Stability indicator (green LED)
Operation indicator (red LED)
Transistor output
※ The waveforms of "Operation indicator" and "Transistor output" are for color match mode operation.
They are opposite operation for color mismatch mode operation.

Unit Description

1
A-130
Connection
(brown) +V
1
Load
4
(black) Output
+
12-24VDC
-
(blue) 0V
3
2
(white) SET
Pin number Cable color
1
Brown
2
White
3
Blue
4
Black
Match rate
Teaching value
Hysteresis
Sensitivity
ON
OFF
ON
OFF
ON
OFF
1. Operation indicator (OUT): ON (red) indicates operation.
2
2. Stability indicator (STB): ON (green) indicates stable status.
3
3. Timer indicator (TMR): ON (orange) when timer is set.
4
4. Teaching indicator:
Displays the reference color after successfully "teaching" the color.
※ The teaching color and the color displayed on the teaching indicator
5
may differ depending on environment conditions (ambient light,
reflection angle, material, etc.) .
6
5. SET key: Used for function settings.
6. Color match/mismatch switch
- N.O.: Output ON when target color matches reference color.
- N.C.: Output ON when target color does not match reference color.
PNP open collector output
Photoelectric sensor circuit
Output short
overcurrent
prevention
circuit
Connector cable (sold separately)
Name
※ Connector cable model
+V
: CIDH4-
SET
(connector length
GND (0V)
※ Please use Autonics M12 connectors.
For more information, please refer to the connector
OUT
cable section.
Connection
(brown) +V
1
+
12-24VDC
-
(black) Output
4
Load
(blue) 0V
3
2
(white) SET
: 2, 3, 5, 7m)