DYNAMICS GROUP Dings 6-61003-545 Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial DYNAMICS GROUP Dings 6-61003-545. DYNAMICS GROUP Dings 6-61003-545 12 páginas. End-mount brake, enclosed wpdt housing with deep drawn cover

Imprimir página

Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself

and others by observing all safety information. Failure to comply with instructions could result in personal injury

and/or property damage! Retain instructions for future reference. When unpacking the brake, inspect it carefully

for damage that may have occurred during transit.

DESCRIPTION

These magnetic disc brakes mount directly onto NEMA 56C,

143TC, and 145TC frame motors, on the end opposite the

drive shaft. The brake is direct acting, electro-magnetically

released, and spring set. It uses rotating friction and station-

ary disc contact to supply positive braking action. It retains

quick release and setting capabilities at all times.

Model 6-60000-545 is designed to mount directly onto

C-face motors where a gasket between the brake and motor

will prevent liquid media from entering the brake.

Model 6-60000-535 is for TEFC motors or foot mount

applications. The hub seal prevents liquid media from

entering the brake through openings in the motor fan cover

or foot mounting bracket.

WARNING: Do not install or use these brakes in an

explosive atmosphere.

4740 WEST ELECTRIC AVENUE MILWAUKEE, WI 53219 PHONE 414/672-7830 FAX 414/672-5354

Bulletin No. BK4710 (3/07 REV A)

Enclosed WPDT Housing

with Deep Drawn Cover

SPECIFICATIONS

Torque:

1-1/2 through 20 lb. ft.

NEMA Motor Frame Sizes:

Enclosure:

Aluminum, with steel cover.

Voltage:

All NEMA single phase voltages and

frequencies are standard. Others optional.

Duty:

Rated for continuous duty.

Mounting:

Direct to NEMA C face. Horizontal or

vertical position with slight modifications.

Maximum Ambient Temperature:

Maximum Input Speed:

60 Series End-mount

Brake Instructions

56C, 143TC and 145TC.

40 o C.

3600 RPM.