DYNAMICS GROUP Dings F8-62006-67B Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Equipamento industrial DYNAMICS GROUP Dings F8-62006-67B. DYNAMICS GROUP Dings F8-62006-67B 12 páginas. Hazardous brake

Imprimir página
Figure 3. 60 Series Hazardous Location Brake - Adapter Installation
Figure 4. 60 Series Hazardous Location Brake - Foot Mount Installation
INSTALLATION OF FOOT MOUNTING BRAKE
(See Figure 4)
8. Install bracket (1) over motor shaft extension and half-
tighten cap screws (2). The distance from the mounting face
of the bracket (1) to end of motor shaft must not exceed
dimension "AH" max.
9. Clamp dial indicator "A" to motor shaft and position bracket
(1) with shims as necessary, by tapping with a soft mallet
until dial indicator does not read over .002" total change in
one full revolution of the shaft. Move dial indicator to "B"
and position bracket until dial indicator does not read over
.004" total change in one full revolution of shaft.
10. Draw all bolts up tight. Recheck alignment with dial
indicator. Readjust if necessary until tolerances are within
limits with all bolts tight.
11. Remove hub (6, Figure 7) from brake and mount hub with
key (not supplied by Dings) on motor shaft per dimension
as shown in Figure 4. Tighten both setscrews to 8-10 lb. ft.
torque. Complete mounting of brake (paragraph 2-6).
6
FOOT MOUNTING
MODEL NO.
CAST IRON
ALUMINUM
8-61001-66B
8-61001-67B 23
8-61003-66B
8-61003-67B 23
8-62006-66B
8-62006-67B 24
8-63010-66B
8-63010-67B 25.5
8-63015-66B
8-63015-67B 25.5
DIMENSIONS
WT.
TORQUE
AH
LB.
LB. FT.
MAX.
MIN.
40.5
1.5
2 3/8
1 3/4
1.5
2 3/8
1 3/4
40.5
3
2 3/8
1 3/4
3
2 3/8
1 3/4
43
6
2 3/4
2
6
2 3/4
2
45.5
10
3 1/8
2 1/4
10
3 1/8
2 1/4
45.5
15
3 1/8
2 1/4
15
3 1/8
2 1/4