8x8 Inc Yealink T23P Manual rápido

Procurar online ou descarregar pdf Manual rápido para Telefone 8x8 Inc Yealink T23P. 8x8 Inc Yealink T23P 2 páginas.

Manually Provision a Yealink T23P or T46G Phone without GUI

Objective

To manually provision a Yealink T23P or T46G phone. Please note that it is best practice to perform a factory reset

when manually provisioning a phone.

Applies To

• Yealink 23P and T46G devices

Procedure

Provisioning a Yealink T23P Phone

1. On the phone, go to Menu > Settings > Advanced Settings.

• Use admin or the MAC password when prompted for a password. Change Password mode from abc to 2aB,

especially when entering MAC password.

2. Select Reset to Factory. The phone should now reset to factory default settings.

3. Once the phone reboots, go to Menu > Settings > Advanced Settings.

• Password: admin

Select Auto Provision. Enter the provisioning server address:

Note: For ":" or "/" enter the * key multiple times.

5. Press Save and click OK to confirm.

6. The phone will auto-restart after 20 seconds, or you can restart the phone manually at any time.

7. If the phone was previously activated, it should come online. If not, move on to the next step and activate the

phone.

https://support.8x8.com/equipment-devices/phones/yealink/manually-provisioning-yealink-t23p-or-t46g-phone

https://ylcfg.8x8.com/yealink

Updated: Fri, 17 Apr 2020 08:18:01 GMT