Dynamix RC 908 EV 35 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia Dynamix RC 908 EV 35. Dynamix RC 908 EV 35 16 páginas. Ethernet to v.35 interface converter

Imprimir página

Chapter 3. Installation and Preparation

1. First, please choose the appropriate configuration structure to be applied,

referring to the sketch map of recommended basic connection structure.

2. Make sure that the V.35 cable matches the connected equipment. If

RC907/908-EV35 interface converter is used to connect DCE, please use DTE

cable.

3. Use CAT.5 UTP to connect the Ethernet port of RC907/908-EV35 interface

converter, and make sure that the length of the UTP cable does not exceed

100m.

The pin definitions of the RJ45 interface on RC907/908-EV35 interface converter

are as follows.

Pin number

Definition

TX+

Details

Output+

The following diagram indicates the correct line sequence of straight-through UTP

cable.

RC907/908-EV35 UTP-RJ45

Pin 1

Pin 2

Pin 3

Pin 6

RC907/908-EV35 User Guide

NO.1 pin

NO.8 pin

RX+

TX-

Not

Used

Output-

Input+

Hang

Ethernet device RJ45

Pin 1

Pin 2

Pin 3

Pin 6

Not

RX-

Used

Hang

Input-

Not

Used

Hang