Emerson 510-1018-00 Informações técnicas - Página 3

Procurar online ou descarregar pdf Informações técnicas para Unidade de controlo Emerson 510-1018-00. Emerson 510-1018-00 3 páginas. Co2 refrigeration units changeover valve service kit

Imprimir página

▪ Mount the deflector and tighten it manually to 1-5 Nm (Figures 11 & 12).

▪ The changeover valve must be fully open during unit operation (spindle out Figures 13 & 15).

▪ Mount the spindle cap and check the presence of the copper gasket (Figure 14).

Figure 11

Figure 12

Figure 15

Spindle protective cap

40 Nm

Table 2

: Torques on the changeover valve in Nm

NOTE: For information on the maintenance and lifetime of the PRV, please refer to the unit application

guidelines.

- The contents of this publication are presented for informational purposes only and are not to be construed as warranties or guarantees, express or implied, regarding

the products or services described herein or their use or applicability.

- Emerson Climate Technologies GmbH and/or its affiliates (collectively "Emerson"), as applicable, reserve the right to modify the design or specifications of such

products at any time without notice.

- Emerson does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of any

Emerson product remains solely with the purchaser or end user.

- Emerson does not assume responsibility for possible typographic errors contained in this publication.

TI_Unit_CO2_Stream_04_EN_Rev00

Figure 13

Spindle "open" / "closed"

25 Nm

Ident number 3293976 (P/N 900-0010-00/Rev00)

Figure 14

Seal gland

15 Nm

3/3