Autonics PA10-V Manual de início rápido
Procurar online ou descarregar pdf Manual de início rápido para Controlador Autonics PA10-V. Autonics PA10-V 8 páginas. Multifunctional sensor controller
Também para Autonics PA10-V: Manual de instruções (2 páginas)
Imprimir página
PA10 Series
Multifunctional Sensor Controller
Features
● 13 kinds of various operation modes selected by DIP switches
● High speed input response
● Flip-flop mode for level control
● Multifunctional unit with timer mode
● DIN rail, Mounting to panel
● Wide range of power supply (100-240VAC 50/60Hz)
Please read "Caution for your safety" in operation
manual before using.
Ordering Information
PA10
U
Function
Item
Specifications
Model
Power supply
Allowable operation voltage 90 to 110% of rated voltage
Power consumption
Power for external sensor 12VDC ±10% Approx. 200mA
Input (IN1) (IN2)
Input type
Contact output
Output
Solid-state
output
Response time
Time setting
function by
Have
each mode
※Only for
None
PA10-U
Mechanical
Relay
life cycle
Electrical
Dielectric strength
Insulation resistance
Ambient
Environ-
temperature
ment
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Unit weight
※ If the load is connected over 200mA at the sensor output, it may cause mechanical trouble.
※ Environment resistance is rated at no freezing or condensation.
O-2
No mark
Input
P
U
V
W
PA10
PA10-U
PA10-V
100-240VAC 50/60Hz
100VAC 50/60Hz: Max. 9VA (Condotion:12VDC/200mA resistive load), 240VAC 50/60Hz: Max. 10VA
Selectable NORM/INV.
Selectable OR/AND
Selectable NORM/INV.
operation for IN1, IN2 input.
Operation for IN1, IN2 AND.
Selection function for IN2
derivative action.
NPN input type
NPN input type PNP input type
● PA10-U (No-voltage input) Impedance at short-circuit: Max. 680Ω,
Residual voltage at short-circuit: Max. 0.8V, Impedance at open: Min. 100kΩ
● PA10-V/PA10-W (No-voltage input) Impedance at short-circuit: Max. 300Ω,
● PA10-VP/PA10-WP (Voltage input) Input impedance: 5.6kkΩ, "H" level voltage:5-30VDC, "L" level voltage: 0-2VDC
OUT: 250VAC 3A (resistive load)
O . C OUT1/O . C OUT2
O . C OUT: NPN open collector output
: NPN open collector output
Max. 30VDC 100mA
Input: Min. 2㎲, Relay contact output: Min. 10ms, Transistor output: Min. 0.5㎲ (When it is encoder mode)
• ON Delay Mode
• One-Shot Delay Mode
• Flicker One-Shot Mode
• High-Speed Detection Mode
• Normal Mode
• Flip-Flop Mode
Min. 10,000,000 operations
Min. 100,000 operations (250VAC 3A resistive load)
2000VAC 50/60Hz for 1 minute
Min. 100MΩ (at 500VDC megger)
-10 to 55℃, storage: -25 to 60℃
Approx. 150g
NPN input
PNP input
High function controller
General purpose controller
2-channel controller
Power amplifier
PA10-VP
Residual voltage at short-circuit: Max. 2V, Impedance at open: Min. 100kΩ
Max. 30VDC 100mA
• OFF Delay Mode
• Flicker Mode
• Low-Speed Detection Mode
• ON/OFF Delay Mode
• Encoder (Mode 9 to 11)
PA10-W
PA10-WP
Selectable NORM/INV.
Operation for IN1, IN2 AND.
NPN input type PNP input type
OUT1, OUT2: 250VAC 3A (resistive load)
-
Approx. 160g