dbRevO Wireless Tech All-in -One Design Manual de utilização - Página 13

Procurar online ou descarregar pdf Manual de utilização para Acessórios para bicicletas dbRevO Wireless Tech All-in -One Design. dbRevO Wireless Tech All-in -One Design 15 páginas. Wireless tech all-in -one design

Imprimir página

V. Maintenance and Repair

◆Maintenance:

1. To check if there's any rusty part or leaks carefully. Leaks may be eroded

to accelerate damage and enlarge the leaks itself.

2. To clean dbRevO wheel periodically and keep away from all corrosive

materials such as salt.

3. Do not polish, drill or carve on wheel surface. Leaks may be caused by

large scratch, chisel hole or nick.

4. Users shall pay attention to find out noise source if any, and try to solve

the problems as soon as possible.

5. It is strictly prohibited to wash the wheel by strong spout to avoid

damaging the battery. Users shall clean the wheel by clean mop.

6. Users shall use neutral or soft detergent to avoid damaging the wheel

housing.

7. It is strictly prohibited to clean the wheel by sea water or salty water. Users

shall use cold water to avoid corrosion problems.

8. It is suggested to park the bicycle indoor or at cool places to avoid being

exposed to the sun and rain. Users shall keep the wheel dry to avoid rusty

problems. .

9. It is strictly prohibited to drop or to dash against the wheel. Huge external

force may cause the deformation and damage the internal electrical parts,

which is dangerous for users safety.

◆Simple Repair Instruction

1. To inspect the safety mark on the tire and to replace new tire instantly if

abrasion exceeds the mark.

2. To inspect the front and rear brakes and parts of the bike to see if any

operation fails, wire disconnection, or damage problems.

3. To keep the tire pressure within the marked scope on the tire because tire

may be burst when driving.

4. To check if there is chapping, damage or abnormal abrasion on tire or not.

Users shall replace a new tire instantly if it is damaged severely.

5. To check if there is excessive abrasion for brake pad or not. It shall be

replaced to avoid inflexible brake.