ADENDORFF MAC AFRIC SMIXER-001 Instruções de funcionamento originais - Página 3
Procurar online ou descarregar pdf Instruções de funcionamento originais para Misturador ADENDORFF MAC AFRIC SMIXER-001. ADENDORFF MAC AFRIC SMIXER-001 6 páginas. Stirring electric 800w paddle/mixer slade not included
Imprimir página
controlled with the switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool
accidentally.
20. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
tools are dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool's operation. If
damaged, have the power tool repaired before use.
poorly maintained power tools.
22. Keep cutting tools sharp and clean.
cutting edges are less likely to bind and are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
Service
24. Have your power tool serviced by a qualified repair person using only identical
This will ensure that the safety of the power tool is maintained
replacement parts.
VOLTAGE WARNING:
Before connecting the machine to a power source (receptacle, outlet, etc.), be sure the
voltage supplied is the same as that specified on the nameplate of the machine. A power
source with voltage greater than that specified for the machine can result in SERIOUS
INJURY to the user, as well as damage to the machine. If in doubt, DO NOT PLUG IN THE
MACHINE. Using a power source with voltage less than nameplate rating is harmful to the
motor.
Power
Many accidents are caused by
Properly maintained cutting tools with sharp
Model
Rated Power Input
No-Load Speed
Net Weight
※ Due to the continuing program of research and development, the specifications herein are
subject to change without prior notice.
1.
Always hold the tool firmly and provide for a secure stance. The power tool is guided
more secure with both hands.
2.
Make sure the stirring paddle is mounted securely before starting operation.
3.
Always wait until the tool has come to a complete stop before placing it down or
changing the direction of its rotation.
4.
Keep hands away from rotating parts.
5.
Do not use for explosive materials (e. g. easily inflammable solvent). Power tools produce
sparks which could ignite developing vapours.
.
6.
Do not use a tool with a damaged mains cable. Do not touch the damaged cable and pull
the mains plug when the cable s damaged while working. Damaged cables increase the
risk of an electric shock.
7.
In case the tool should fall into the material to be stirred, pull the mains plug immediately
and have the tool checked by an after-sales service agent. Material that has penetrated
the tool can cause damage and lead to an electric shock.
8.
Always use the auxiliary handle supplied with the tool. Loss of control can cause
personal injury.
SAVE THESE INSTRUCTIONS.
WARNING! MISUSE or failure to follow the safety rules stated in this instruction manual may
cause serious personal injury.
SPECIFICATIONS
SMIXER-001
800 W
680 r/min
2.4 Kg
ADDITIONAL SAFETY RULES
Q1U-FF02-160B
1010 W
620 r/min
3.5 Kg