909 CD18 series Manual de instruções - Página 10
Procurar online ou descarregar pdf Manual de instruções para Perfurar 909 CD18 series. 909 CD18 series 19 páginas. 18v – 24v lithium hammer drill & drill /driver
Imprimir páginaWhen to charge the battery
New batteries are shipped in a low charged condition and
should be fully charged before Use.
The battery pack can be recharged at any time during use,
provided the pack is not overheated.
If the battery pack starts to cut out due to low voltage, or
previous tasks undertaken can no longer be performed, it is
suggested to stop using the tool and recharge the battery.
For storage, it is suggested to recharge the battery between
50% and 75% charge. 1 hour using the fast 1 hour charger
after the battery pack has been used and charged a few
times.
Unpacking
Due to modern mass production techniques, it is unlikely
that your 909 Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
10