dbx 586 Manual do Proprietário - Página 15

Procurar online ou descarregar pdf Manual do Proprietário para Amplificador dbx 586. dbx 586 16 páginas. Vacuum tube preamplifier

Imprimir página

LIMITER

Type:

Threshold Range:

Ratio:

Attack and Release:

FUNCTION SWITCHES

INSERT:

NARROW:

EQ:

LINE:

+48V:

PAD:

PHASE:

LO CUT:

METER SOURCE SWITCHES

DRIVE:

INSERT:

OUTPUT:

DIGITAL OUTPUT OPTION SWITCHES

(Note:The digital output option switches are enabled only when the optional dbx TYPE IV™ module is installed in the unit.)

DITHER:

SHAPE:

REAR PANEL SWITCHES

INST:

+4 dBu/-10 dBV:

INDICATORS

CLIP

LIMIT:

OPTIONS

Digital output module:

POWER SUPPLY

Operating Voltage:

Power Consumption:

Fuse:

Mains Connection:

PHYSICAL

Dimensions:

Weight:

Shipping Weight:

Note: 0 dBu = 0.775V RMS. Specifications are subject to change without notice.

dbx PeakPlus™ (patent-pending)

0 dBu to + 22 dBu (off)

∞ : 1

Program-dependent

Inserts a device connected to the rear-panel Return jack into the signal path.

Selects narrow (0.5 octave) bandwidth for the MID frequency control

Enables the equalizer section

Selects the Line inputs

Enables the 48V phantom power for the Microphone input

Attenuates the input signal by 20 dB.

Reverses pins 2 and 3 of the input XLR connector.

Enables the 75 Hz, 12 dB/octave low cut filter

Monitors the signal level at the input to the vacuum tube

Monitors the signal level at the Insert Return jack

Monitors the output signal level

See manual for dbx Type IV™ option

Switches the gain and impedance of the Line Inputs to allow for connection

of unbalanced devices with passive instrument pickups

Switches the nominal output level between +4 dBu and -10 dBV

Red LED to indicate when the internal signal level is within 3 dB of actual

waveform clipping; sense points are at all critical stages of the circuit

Red LED to indicated when the PeakPlus™ limiter is active

Contact dbx for further details.

100V, 120V, 230V, 240 VAC 50/60 Hz.

30 Watts maximum.

100/120V: 315mA 250V Slow Blow 5mm X 20mm

230/240V:T160 mA 250V 5mm X 20mm

IEC 320 Receptacle

3.5" H X 19"W X 8" D

12 lbs (5.5 kg)

13 lbs (5.9 kg)

586