Dynapac CA 250 Manual de oficina - Página 5

Procurar online ou descarregar pdf Manual de oficina para Veículo utilitário Dynapac CA 250. Dynapac CA 250 11 páginas. Vibratory roller
Também para Dynapac CA 250: Manual de oficina (20 páginas)

Imprimir página

FITTING

Before modifying

Fig. 1 Fitting the pad half

1. Transverse beam

2. Pad half

Fig. 2 Drilling through holes

Fitting must be done in a workshop environment, on a

clean, level base and with lifting capabilities for at least

1000 kg (2,200 lbs). Ensure at least 3 meters (120") of

free space in front of the machine (see overleaf).

Estimated time for this retrofitting is about 6 hours.

The following tools are required:

- Lift, at least 1000 kg (2,200 lbs)

- Screw clamps

- Drilling machine

- Drill, 22 mm (7/8")

- Hexagonal socket wrench 38 25 71

- Torque wrench

- Socket wrenches

1. Dismantle the front transverse beam (1).

2. Lift the first pad half (2) and place it on top of the

3. Drill two 22 mm (7/8") holes through the pad shell

CA 250/252/262 W1065EN2

Make sure the drum is well cleaned.

drum. Align the pad half with the outer edges of the

drum. Fix the pad half with screw clamps against

the drum shell.

Keep well clear of the hoisted object. En-

sure that hoisting hooks are securely

anchored.

and the drum shell. Use the two 8 mm pre-drilled

holes as position guides.