DYNAPAR NorthStar NexGen RIM Tach HT85 Manual de instalação - Página 7
Procurar online ou descarregar pdf Manual de instalação para Conversor de multimédia DYNAPAR NorthStar NexGen RIM Tach HT85. DYNAPAR NorthStar NexGen RIM Tach HT85 7 páginas.
Imprimir página
Code 1: Model
Code 2: PPR
HT8
HT8 Hollow
0060
0480
Shaft
0120
0960
0240
1920
Available with
bore sizes up to
2.875"
0075
0600
0150
1200
0300
2400
Available with
bore sizes up to
3.875"
0064
0512
0128
1024
0256
2048
Available with
bore sizes up to
4.500"
Note: See ACCESSORIES Section for Connectors and Spare Parts
For additional bore sizes up to 4.500" maximum, please consult the factory.
inch
DIMENSIONS
[mm]
8X M4-0.7X20 SOCKET HEAD SCREW
TIGHTEN TO 15IN-LBF (REF)
SECOND OUTPUT
(OPTIONAL)
Worldwide Brands: NorthStar
INNOVATION - CUSTOMIZATION - DELIVERY
WWW.DYNAPAR.COM
Headquarters: 1675 Delany Road • Gurnee, IL 60031-1282 • USA
Ordering Information
To order, complete the model number with code numbers from the table below:
Code 4: Wheel Bore
Code 3: Index
Thru-bores
L
No Index
M25 25 mm
T01 1-1/8"
Z With Index
M40 40 mm
T02 1-3/8"
Signal Output
M48 48 mm
T03 1-5/8"
M55 55 mm
T04 1-7/8"
M65 65 mm
T05 2.00"
M70 70 mm
T06 2-1/8"
T07 2-1/4"
T08 2-3/8"
T09 2-1/2"
T10 2-7/8"
Bores with 1.25" per
foot taper
P01 1-1/8"
P02 1-3/8"
P03 1-5/8"
P04 1-7/8"
P05 2.00"
P06 2-1/8"
P07 2-1/4"
P08 2-3/8"
P09 2-1/2"
P10 2-7/8"
ANTI-ROTATIONAL ARM
12.31
[312.67]
15.92
[404.37]
[17.92 [455] for bores above 2.875]
• Acuro
• Dynapar
TM
TM
Customer Service:
Tel.: +1.800.873.8731
Fax: +1.847.662.4150
Code 5: Electrical
Ordering Information
1 5-26VDC in,
5-26VDC Line Driver out
(IC-WE), Single output
2 5-26VDC in,
5-26VDC Line Driver out (IC-
WE), Dual output
7.75±.25
[196.85±6.35]
1/2" NPT
CONDUIT CONNECTION
7.96
[8.96 [228] for bores above 2.875]
[202.18]
[13.31 [338] for bores above 2.875]
REFER TO ORDERING INFORMATION
FOR AVAILABLE BORE SIZES.
• Hengstler
• Harowe
TM
TM
Technical Support
Tel.: +1.800.234.8731
Fax: +1.847.662.4150
Code 6: Termination
C Latching Industrial Connector
with 1/2" NPT
M 10 pin MS Connector
P 18" Pigtail
Q Latching Industrial Connector
on 18" Cable
.375X24 UNF
TIGHTEN TO 20FT-LBS (REF)
0.87 [22.1]
2.13 [54.1]
8.71 [221.23]
0.1
[2.5]
2.81
[71.4]
TM
European Sales Representitive
Hengstler GmbH (Germany)
Uhlandstrasse 49, 78554 Aldingen
www.hengstler.com
NorthStar™ brand is a trademark of DYNAPAR. All rights reserved.
Document No. 703284-0001, Rev. A ©2020 DYNAPAR
Page 7