Autonics PSAN Series Manual do produto - Página 2
Procurar online ou descarregar pdf Manual do produto para Instrumentos de medição Autonics PSAN Series. Autonics PSAN Series 7 páginas. Display type pressure sensors
Também para Autonics PSAN Series: Manual (2 páginas), Manual do produto (6 páginas), Manual (13 páginas)
Imprimir página
Ordering Information
This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics website.
P
S
A
N
-
❶ Medium / Port fitting position
No mark: Pneumatic type (gas) / Back
D: Pneumatic type (gas) / Bottom
B: Fluid type (liquid, gas) / Back
L: Fluid type (liquid, gas) / Bottom
❷ Pressure type and Range
Pressure
Rated range
0.0 to 100.0 kPa
01
Static
0 to 1,000 kPa
1
Negative
0.0 to -101.3 kPa
V01
Compound -101.3 to 100.0 kPa
C01
❸ Wiring
No mark: Cable type (fluid type)
C: Connector type
Product Components
• Product
• Instruction manual
• Connector type: Bracket A / B, Connector wiring (PSO-C01)
• Cable type: Bracket C
Sold Separately
• Front cover (PSO-P01), Panel bracket (PSO-B02 / B03)
• Pneumatic type: M5 gender (PSO-Z01)
Unit Descriptions
1. Pressure range (sticker)
2. Display part (red)
1
2
3. Output indicator (OUT1: red , OUT2: green)
3
3
4
4. [M] key
5
5. [▼] , [▲] key
Connections
Color
Function
Brown
+V
Blue
0 V
Black
OUT 1
White
OUT 2
Orange
Option input / output
■ NPN open collector output
Brown
LOAD
Black
LOAD
OCP
White
OCP
①
②
Orange
Output
impedance
Blue
• ①: Option voltage / current output model, ②: Option external input model
• OCP (over current protection circuit)
• There is no short circuit protection circuit. Do not connect directly to power or capacitive loads.
• The control output is abnormal when the control output circuit is shorted or over current is
supplied.
• Pay attention to the input impedance of the connected device when using analog voltage
output. Be sure to the voltage drop due to the resistance of the wiring when extending the
wiring.
❶
❷
❸
❹
❺
-
❹ Control output
No mark: NPN open collector output
P: PNP open collector output
❺ Option input / output
V: Voltage output
A: Current output
H: External input
❻ Pressure port
Medium
Pneumatic
Port
R1/8
○
○
Rc1/8
NPT1/8
○
7/16-20UNF
-
9/16-18UNF
-
• Unit sticker
Run mode: Displays PV (present value), SV (setting
value)
Setting mode: Displays parameter and setting value
Turns ON when the corresponding control output
is ON.
Enters parameter group, selects item and returns
run mode.
Sets preset of output operation mode, runs the
mode or changes parameter.
■ PNP open collector output
Brown
OCP
Black
OCP
White
Orange
Output
impedance
Blue
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
■ Pneumatic type, back port, connector type
❻
30
■ Pneumatic type, bottom port, connector type
30
Fluid
○
Rc1/8(standard), NPT1/8
-
■ Fluid type, bottom port, connector type
○
○
30
○
■ Fluid type, back port, cable type
30
■ Bracket A
20
20
Ø4.2
30
Installation
■ One-touch fitting
Pneumatic type
Spanner: 12 mm
■ Bracket
Use spring washers and hexagon wrench bolts (tightening torque: ≤ 3 N m) to select
and install a bracket suitable for your environment.
LOAD
• Bracket A
LOAD
①
②
■ Wiring
• Do not pull the wiring with a force of more than 30 N.
30.7
B
22.8
7.9 A
20
2-M3
12
cable
32
20
2-M3
32
20
17
B
42.3
30
12.3 A
20
B
17
Ø4, 3m
■ Bracket B
3-Ø3.2
25
35
Ø4.2
30
20
3-Ø3.2
1.6
13
Fluid type
Spanner: 17 mm
Connector type
• Bracket B
Port
A
B
Rc1/8
0
-
NPT1/8
0
Inner M5
tap
R1/8
8
2-M3
Port
A
B
R1/8
Inner M5
8
tap
NPT1/8
7/16-
11
-
20UNF
2-M3
Port
A
B
Inner M5
R1/8
8
tap
9/16-
15.4 -
18UNF
■ Bracket C
30
22
Ø22
20
4-Ø3.2
36
15
Connect the metal part with a
spanner so that no large force is
applied to the unit body.
(tightening torque: ≤ 10 N m, it may
cause malfunction.)
Cable type
• Bracket C