Hifonics zeus series Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para Altifalantes para automóvel Hifonics zeus series. Hifonics zeus series 13 páginas. Zeus series
Também para Hifonics zeus series: Manual do Proprietário (4 páginas), Manual de início rápido (8 páginas), Manual do utilizador (8 páginas), Manual (12 páginas)
Imprimir página
OPERATING ELEMENTS
INPUT SENSITIVITY
Turn the volume controller of your head unit to the center medium position and then turn up the INPUT LEVEL controller ( 2 )
until you have an average medium level without distortion. This setting usually provides sufficient power reserves at optimum
weighted signal-to-noise ratio.
LOWPASS FILTER
Set the desired crossover frequency of the low pass filter by using the LPF controller ( 4 ). Hence, only the frequencies below
the chosen crossover frequency will be amplified and the subwoofer plays more precisely and efficient.
BASS BOOST
By using the BOOST controller ( 3 ) you are able to increase the bass boost level from 0 dB to 18 dB.
Caution: Please use the bass boost with care.
BASS LEVEL REMOTE CONTROLLER
Connect the included Bass Level Remote Controller at the BASS LEVEL CONTROLLER input ( 1 ). This allows you to control the
bass level f.e. out of the driver's seat.
PHASE
The PHASE switch ( 5 ) allows you to set the phase between 0° or 180° to match the output signal with the vehicle's interior
acoustic and the loudspeakers of the sound system.
4
PHASE
POWER
0°
180°
50Hz 150Hz
PROTECT
ON
OFF
AUTO TURN-ON
5
10
3
2
LPF
BOOST
LEVEL
0dB +18dB
MIN MAX
ZRX200A
ACTIVE SUBWOOFER SYSTEM
BASS LEVEL
POWER
MIN
MAX
LINE INPUTS
HI LEVEL INPUT
+L
+R
BASS LEVEL
CONTROLLER
1
FUSE
R
L–
L
R–
25A
LOW LEVEL INPUT
POWER INPUTS
GND
REM
+12V