Dynaphos Starter SK-200 Manual de instruções - Página 2

Procurar online ou descarregar pdf Manual de instruções para Lanterna Dynaphos Starter SK-200. Dynaphos Starter SK-200 8 páginas. Studio flash

Savety

Thank you for choosing DYNAPHOS studio lighting equipment! Before you proceed further, please read the

instruction manual.

Use of this product requires basic photographic knowledge and habits.

Attention! Please, follow the savety instructions!

• Starter lighting equipment is designed for photo amateurs and it's not suitable for professional work, as

also as any kind of intensive use!

• Keep out of reach of children!

• Make sure that the power outlet you plug the flash is working correctly.

• Do not disassemble or modify! There are high-voltage components inside the unit. Repairs should only be

performed by authorised service personnel!

• Do not touch the lamp cap when the flash or modeling lamp is working due to risk of burns or electic shock!

• Disconnect the flash from the power supply when mounting accessories on or off or when you're cleaning

the flash unit.

• Durint operation, some of the light control accessories may be heated to high tempetures! Wait to cool

down before you mount them off.

• During operation, do not cover the flash! Make sure that the flash unit will not be activated in the vicinity

of inflammable gases or liquids. Risk of explosions!

• Do not expose the flash unit to water drops and splashes!

• In every 30 continuous flashes at full power, leave the flash to cool down for about 3 minutes. Overheating

will occur if it is used continuously without cooling down.

• Do not flash directly into eyes from a close distance! Direct flashing into the eyes of person or animals can

cause damage to the retina and severe disruption of the vision – up to and including permanent blindness!

• If the housing has been damaged in such a way that internal components are exposed, the flash unit may no

longer be used. Disconnect from the power supply! Do not touch any internal components. HIGH VOLTAGE!

• Use only light controlling accessories autorized by DYNAPHOS Ltd.