Galaxy Audio Any Spot AS-1000R Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Recetor Galaxy Audio Any Spot AS-1000R. Galaxy Audio Any Spot AS-1000R 20 páginas. As-ck series uhf wireless camera systems
Também para Galaxy Audio Any Spot AS-1000R: Manual do utilizador (20 páginas)
Imprimir página
11. With the receiver power switch off and the volume control
set to minimum, plug in a set of ear buds to the 1/8" stereo
Ear Bud output jack. Fit the ear buds snugly into your ears
and adjust for a comfortable fit.
12. Switch on the power to the receiver and note the LED. It
should come on Red and then fade out to Green. This
indicates a signal is being received from the transmitter.
13. Starting from minimum, slowly increase the volume control
until the desired level is achieved. If both inputs on the
transmitter are in use, you may need to adjust the balance
between the MIC and LINE volume controls.
14. Walk around the area where the receiver will be used to
ensure you have good coverage with no interference. If any
interference is heard, select a new frequency program number
on both the transmitter and the receiver until a clear frequency
is found.
15. If the audio source levels provided to the transmitter
change, the volume controls on the transmitter may need
to be re-adjusted for optimum performance.
AS1000
8