Autonics CX6S-1P Series Manual do produto - Página 9

Procurar online ou descarregar pdf Manual do produto para Temporizador Autonics CX6S-1P Series. Autonics CX6S-1P Series 11 páginas. Lcd counter / timer

Imprimir página
Autonics CX6S-1P Series Manual do produto
Mode
Time chart and output operation description
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
Setting time
Down
INT
0
(Interval)
OUT2 (OUT)
• Power reset
Control output turns ON and time starts when INA
signal turns ON.
Time is RESET when INA input is OFF.
When INA input is ON: Power on time start operates,
Reset off time start operates.
When reaching the setting time, Auto reset is activated.
Control output is ON when Time is progressing.
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
Setting time
Down
INT.1
0
(Interval 1)
OUT2 (OUT)
• Power reset
Control output turns ON and time starts when INA
input is ON.
When INA input is ON: Power on time start operates,
Reset off time start operates.
When reaching the setting time, Auto reset is activated.
Control output is ON when Time is progressing.
INA input is ignored while time is progressing.
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time1
Up
Setting time2
0
Display
Setting time2
Down
Setting time1
0
INT.2
OUT1
(Interval 2)
OUT2
• Power reset
Time starts when INA input is ON. OUT1 is ON during T1
(hold) or t1 time.
RESET when INA input is OFF.
When reaching the setting time 1, the progressed time
is reset.
OUT2 is ON during T2 (hold) or t2 time.
• Output turns OFF when reaching the setting time
even if One-shot time is longer than the setting time.
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
OFD
Setting time
Down
(Signal off
0
delay)
OUT2 (OUT)
• Power reset
If INA input is ON, control output remains ON.
(except when power is off and reset is on)
When INA input is OFF, time progresses. When reaching
the setting time, Auto reset is activated.
POWER
INA (START)
INH (INHIBIT)
RESET
On_delay
Up
Off_delay
0
Display
On_delay
Down
Off_delay
NFD
0
(On-Off
delay)
OUT2 (OUT)
• Power reset
1) When INA input is ON, output is ON and time is
progressing, then output is OFF after On_Delay time.
2) When INA input is OFF, output is ON and time is
progressing, then output is OFF after Off_Delay time.
If INA input is OFF within On_Delay time, step 2 starts
again.
If INA input is ON within Off_Delay time, step 1 starts
again.
Mode
NFD.1
(On-Off
delay 1)
POWER
INA
T
T
OUT2
(OUT)
T = setting time
INTG
(Integration
time)
POWER
INA
T
OUT2
(OUT)
T = setting time
TOTAL
INA
T1
OUT1
T2
t1
OUT2
t2
T1 = setting time 1
T2 = setting time 2
t1 = One-shot 1
t2 = One-shot 2
ONT.D
POWER
(On time
INA
display)
T
OUT2
(OUT)
T = setting time
INA
T1
T2
OUT2
(OUT)
T1 = On_delay time
T2 = Off_delay time
Time chart and output operation description
POWER
INA (START)
INH (INHIBIT)
RESET
On_delay
Up
Off_delay
0
Display
On_delay
Down
Off_delay
0
OUT2 (OUT)
• Power reset
1) When INA input turns ON, time progresses and
output turns ON after On_Delay time.
2) When INA input turns OFF, time progresses and
output turns OFF after Off_Delay time.
If INA input turns OFF within On_Delay time, output
will turn ON and step2 operate.
If INA input turns ON within Off_Delay time, output
will turn OFF and step1 operate.
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
Setting time
Down
0
OUT2 (OUT)
• Power reset
Time is progressing during INA input is ON.
Time stops during INA input is OFF.
Control output is ON when reaching the setting time.
• Memorize counting value parameter = CLR
POWER
INA (START)
INH (INHIBIT)
RESET
Max.
time range
Up
0
Display
Max.
time range
Down
0
• Memorize counting value parameter = REC
POWER
INA (START)
INH (INHIBIT)
RESET
Max.
time range
Up
0
Display
Max.
time range
Down
0
Time starts when INA input is ON.
Time is RESET when RESET is ON.
Time stops during INHIBIT input is ON.
• Memorize counting value parameter = CLR
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
Setting time
Down
0
• Memorize counting value parameter = REC
POWER
INA (START)
INH (INHIBIT)
RESET
Setting time
Up
0
Display
Setting time
Down
0
• ON time display mode of INA input.
Time is RESET and auto start when RESET is ON.
Time stops during INA input is OFF.
CX6□-□P□F flashes the progressed time in case of 'setting time < progressed
time' at the point of INA input OFF, and stops until RESET input occurs.
INA
T1
T2
OUT2
(OUT)
T1 = On_delay time
T2 = Off_delay time