DynaQuip WaterCop Pro Manual de início rápido - Página 4

Procurar online ou descarregar pdf Manual de início rápido para Produto de canalização DynaQuip WaterCop Pro. DynaQuip WaterCop Pro 4 páginas.

Imprimir página
WaterCop Interface to Security Panels
Pro Interface Contacts
1 - - - - - - - - - - - - 8
7
Brown/White (5VDC)
5 Blue/White (to close)
6 Green (to open)
CAT5-E
3
Green/White
4
Blue
RJ45 Socket
2 Orange
WPC/WPCH Output Signals to Security Panel
1
2
3
4
5
REMOTE VALVE
To order or for additional information, visit watercop.com or call 800-545-3636.
To order or for additional information, visit watercop.com or call 800-545-3636.
Input Signals from Security Panel to Change Valve Position
Apply momentary dry contact closure between lines 5 and 7
to close the ball valve.
Apply momentary dry contact closure between lines 6 and 7
to open ball valve.
Output Signals to Security Panel for Valve Position
Dry contact closure between lines 3 and 4 indicates valve open.
Dry contact closure between lines 2 and 3 indicates valve closed.
1
2
1
2
1
2
6
12V RLY ALARM TROUBLE
Dry contact closure signal to security panel during alerts
An alert is a problem with a sensor. A probe is shorted,
open or low battery is detected. Water is not shut off.
Dry contact closure signal to security panel during alarms
An alarm is a water shut-off due to a sensor detecting water and
activating the system. There is no alarm signal if the valve is
closed by an input from the security panel or the WaterCop panel.
12 VDC Signal when the unit displays
water is off for use with remote relay
Made in the USA
DQ PART NUMBER 192456 REV G