Autonics SCM Series Manual - Página 6
Procurar online ou descarregar pdf Manual para Conversor de multimédia Autonics SCM Series. Autonics SCM Series 13 páginas. Communication converter
Também para Autonics SCM Series: Manual do produto (2 páginas), Manual (11 páginas)
Imprimir página
Installations
SCM-WF48
③
②
①
Rail Lock
Mounting to panel
1) This unit is able to mount on a panel with two fixing screws at center of both sides.
2) For mounting the unit, use M3 screws. Tighten screws with 0.4 N . m torque
SCM-US48I & SCM-38I
There is no Serial Port in SCM-US48I.
Comprehensive Device Management Program (DAQMaster)
DAQMaster is the comprehensive device management program.
Set the communication method switch of SCM-WF48 as USB, and connect this unit and a PC with USB cable.
You can set the communication setting for SCM-WF48 by DAQMaster.
Visit our website (www.autonics.com) and download DAQMaster.
< Computer specification for using software >
Item
Minimum requirements
IBM PC compatible computer with Intel Pentium Ⅲ or above
System
Operating system Microsoft Windows 98/NT/XP/Vista/7/8/10
Memory
256MB or more
Hard disk
More than 1GB of free hard disk space
VGA
1024×768 or higher resolution display
Others
RS-232 serial port (9-pin), USB port
Fixing
screw hole
DIN rail
M3 screw bolt
Panel
Communication Converter
Mounting to and removing from DIN rail
Mounting
1) Hang up the backside holder on a DIN rail.
2) Press the unit toward ① direction until it snaps.
Removing
1) Pull rail locks of the backside of this unit to ② direction.
2) Pull the unit to ③ direction. .
Number of layers
"A" size
(N)
(23N+0.5)
1
23.5mm
2
46.5mm
3
69.5mm
4
92.5mm
< DAQMaster screen >
(A)
Photoelectric
Sensors
(B)
Fiber
Optic
Sensors
(C)
Door/Area
Sensors
(D)
Proximity
Sensors
(E)
Pressure
Sensors
(F)
Rotary
Encoders
(G)
Connectors/
Sockets
(H)
Temperature
Controllers
(I)
SSRs / Power
Controllers
(J)
Counters
"B" size
(23N-3)
(K)
Timers
20mm
43mm
(L)
Panel
Meters
66mm
89mm
(M)
Tacho /
Speed / Pulse
Meters
(N)
Display
Units
(O)
Sensor
Controllers
(P)
Switching
Mode Power
Supplies
(Q)
Stepper Motors
& Drivers
& Controllers
(R)
Graphic/
Logic
Panels
(S)
Field
Network
Devices
(T)
Software
S-33