activTek AP3000 Manual - Página 6

Procurar online ou descarregar pdf Manual para Filtro de ar activTek AP3000. activTek AP3000 16 páginas. Portable whole home office system
Também para activTek AP3000: Manual do utilizador (12 páginas), Manual do utilizador (12 páginas)

Imprimir página

OPERATION

1 . Adjust the fan speed to your preference, keeping in mind that higher fan speeds will give better results .

2 . Using the Normal/High button, set the unit to NORMAL, for typical use, or HIGH, for increased smoke and odor

control .

3 . For HIGH MODE, using the PURIFIER UP and PURIFIER DOWN buttons on the remote control, adjust the

purifiation level to its lowest setting (250 sq . ft . (23m

(if needed) to the square footage (or square meters) of the indoor area .

NOTE:

If you are operating your central heating and air conditioning fan, or other ventilation system,

continuously, set the coverage up to the total ventilated indoor area . Otherwise, set the coverage

up to the size of the room . Do not exceed the size of the ventilated indoor area when setting the

purifier level .

4 . To operate the AWAY MODE feature, in unoccupied areas only,* press the Away Mode button on remote control

until the desired time is reached (2, 4, 6, or 8 hours) . The unit will display AWAY MODE and the remaining time . To

interrupt the AWAY MODE, press the Normal/High button .

NOTE:

"Unoccupied areas" includes pets . Some pets, like humans, may experience adverse reactions

from exposure to increased levels of ozone and should not be present during AWAY MODE

operation .

Fan Speed

Fan Speed (Max)

Purifier Setting

Purifier Coverage

ActivePure® Cell and Ionization

Time Remaining

Away Mode

) for the first 24 hours of operation, them gradually adjust up

HIGH MODE:

The unit's display shows the fan speed

(low to high), the purifier setting (1 bar

to 12 bars), and the purifier coverage in

square feet, for U .S . models, and square

meters, for international units .

NORMAL MODE:

The unit's display shows the fan speed

(low to high) and NORMAL to indicate that

the ActivePure® (RCI) Cell and ionization

are both functioning normally .

AWAY MODE:

The fan will show maximum, and AWAY

MODE will replace the purifier setting . The

amount of time remaining will depend on

how long you have selected for the AWAY

MODE function to operate . The colon (:)

will flash to indicate time being counted

down .