911SafeTrack S4 Manual de instalação - Página 15

Procurar online ou descarregar pdf Manual de instalação para GPS 911SafeTrack S4. 911SafeTrack S4 20 páginas. Vehicle security tracker

Step 6 – Testing Cable (continued)

• To verify Out #2 operation, carefully touch a test wire

connected to vehicle ground to terminal 8 with the blue

wire to see that the desired operation occurs (door unlock,

door lock, flash headlights, sound horn, etc.).

If all Cable tests are confirmed, then --

Plug the Cable into the S4 Connector.

After a few seconds, S4 green LED (labeled C) and the red

LED (labeled G) will turn On. After a couple minutes, the

red LED will start flashing, showing GPS satellite lock.

Now plug the backup Battery into the 2-pin connector with

red and black wires going to terminal 1 and 2. Use a zip tie

to secure the battery to a nearby vehicle cable.

Once you have all connections properly tested, use the

small tie-wraps to secure the Cable to nearby vehicle

cables. Confirm that the 911SafeTrack label is pointed up

so the internal GPS antenna is toward the sky.

911SafeTrack.com