activTek INDUCT 2000 Manual do Proprietário - Página 14
Procurar online ou descarregar pdf Manual do Proprietário para Filtro de ar activTek INDUCT 2000. activTek INDUCT 2000 16 páginas. Electronic air purification system
Também para activTek INDUCT 2000: Manual do Proprietário (9 páginas)
Imprimir página
FIBERgLASS DuCTwORK INSTALLATION
5
5. Insert (4) 2" Threaded bolts into screw holes
at corners of mounting plate. Attach (4) toggle
bolt anchors to ends of threaded bolts.
7
7. Insert (4) toggle bolts into 3/8" holes in duct.
Be sure toggle anchors open after inserting.
9
9. Insert unit into opening. Be sure the air will
pass though the ActivePure cell honeycomb
matrix.
11
11. Plug unit into working power receptacle. Hard wiring unit
into HVAC system should be done by a licensed HVAC
installer or electrical contractor only.
6
Stud
6. Remove backing from mounting plate
adhesive gasket.
8
8. Center large opening in mounting plate over
3.5" opening in duct and press plate to duct.
The adhesive gasket will hold the mounting
plate into place.
Tighten toggle bolts - DO NOT OVERTIGHTEN.
10
10. Secure the unit to the mounting plate with
(4) #8-32 nuts.
(CONTINUED)
9