Autonics ADIO-EC Manual do produto - Página 2
Procurar online ou descarregar pdf Manual do produto para Sistemas de E/S Autonics ADIO-EC. Autonics ADIO-EC 8 páginas. Remote i/o boxes
Imprimir página
Configuration of ADIO-EC
The figure below shows the EtherCAT network and the devices that compose it.
For proper use of the product, refer to the manuals and be sure to follow the safety
considerations in the manuals. Download the manuals from the Autonics website.
EtherCAT Master
Power supply
ADIO-EC
(IO-Link Master)
STEP
Install and ground the ADIO
Hardware
Connect the ports of ADIO
installation
Supply power to the ADIO
IO-Link device
Set parameters and functions
settings
of IO-Link device
Integrate the ADIO-EC
EtherCAT Master
to the TwinCAT 3
↕
ADIO-EC
Set the ports of ADIO-EC
Checking
Check the indicators
the operation
01) The purpose of this document is to provide supplementary information for users' convenience.
The project planning software of the upper level communication system may be different depending on the
user's environment. For more information, refer to the manufacturer's manual.
■ The supported objects
Safe
Vali-
Operation mode
State
dation
01)
Digital Input
-
-
Digital Output
○
-
IO-Link Input
-
○
IO-Link Output
-
○
IO-Link Input/Output
-
○
01) Unsupported on the atIOLink
Software
Download the installation file and the manuals from the Autonics website.
■ atIOLink
"atIOLink" is the Port and Device Configuration Tool (PDCT).
It supports the settings for ports and devices in the Field Network.
Configuration tools
ESI file
IODD file
IO-Link device
Reference manual
⬇
ADIO-EC Product Manual
⬇
⬇
atIOLink User Manual
⬇
TwinCAT 3 Guide
⬇
⬇
ADIO-EC Product Manual
Data
Input
Vendor
Device
Storage
Filter
ID
ID
01)
-
○
-
-
-
-
-
-
○
-
○
○
○
-
○
○
○
-
○
○
Ordering Information
This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics website.
ADIO
-
EC
❶ I/O specification
N: NPN
P: PNP
Product Components
• Product × 1
• Name plates × 20
• M4×10 screw with washer × 1
Sold Separately
• Name plates
• Waterproof cover
Connections
■ Ethernet port
M12 (Socket-Female), D-coded
■ Power supply port
OUT
(7/8'', Socket-
Female)
4
5
3
2
1
01)
■ PDCT port
M12 (Socket-Female), A-coded
1
5
4
Cycle
■ I/O port
Time
-
M12 (Socket-Female), A-coded
-
○
○
1
○
5
4
-
MA
08
A
• Instruction manual × 1
• Waterproof cover × 4
Pin
Function
1
TX +
2
RX +
3
TX -
4
RX -
IN
Pin
Function
(7/8'', Plug-Male)
1, 2
0 V
5
4
3
F.G.
3
4
+24 VDCᜡ
1
2
5
+24 VDCᜡ
Pin
1
Not Connected (N.C.)
2
2
3
4
Not Connected (N.C.)
3
5
Pin
1
2
2
3
4
C/Q: IO-Link, Digital Input/Output
3
5
Not Connected (N.C.)
❶
-
ILM
Description
Transmit Data +
Receive Data +
Transmit Data -
Receive Data -
Description
Sensor and actuator
supply
Frame ground
Sensor supply
Actuator supply
Function
Data -
0 V
Data +
Function
+24 VDCᜡ
I/Q: Digital Input
0 V