iHealth View Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Monitor de tensão arterial iHealth View. iHealth View 12 páginas. Wireless blood pressure wrist monitor
Imprimir página
devices), visit
www.ihealthlabs.com/support
SET UP PROCEDURES
Download the Free iHealth MyVitals App
Prior to first use, download and install "iHealth MyVitals" from the App Store or Google Play Store. Follow the
on-screen instructions to register and set up your personal account.
Access the iHealth Cloud Account
Your iHealth account also gives you access to the free and secure iHealth cloud service. Go to
www.ihealthlabs.com and sign in with the same account.
Charge Battery before First Use
Connect the monitor to a USB port using the charging cable provided until
BODY POSTURE DURING MEASUREMENT
Blood pressure can be affected by the position of the cuff and your physiologic condition. It is
very important that the cuff is positioned at your heart level during blood pressure
measurements.
1. Sit comfortably with your feet flat on the floor without
crossing your legs. Stay still during measurement. Do not
move your wrist, body, or the monitor.
2. Place your hand palm-side up in front of you and leave 1-2cm
between the monitor and the bottom of your palm. If the
monitor is correctly placed, iHealth logo will be facing
upright.
3. The center of the cuff should be at your heart level.
4. It is advised to place the monitor's travel case under your
arm for support and to keep your arm at optimal height for
measurement.
TAKING YOUR BLOOD PRESSURE READING
1. Apply the cuff or press the START/STOP button, the monitor will activate and begin to detect your wrist position.
2. Adjust the height of your wrist, the monitor will detect your wrist position and the measurement will start ONLY when the
correct position is detected. When the position is correct, press "START/STOP" button again to start measurement.
Wrist position too low
Wrist position too high
indicator steady.
Wrist position good