Autonics ARIO-C-MR Manual do produto
Procurar online ou descarregar pdf Manual do produto para Sistemas de E/S Autonics ARIO-C-MR. Autonics ARIO-C-MR 4 páginas. Slim remote i/o
Imprimir páginaTCD210210AA_MODI2
Slim Remote I/O
ARIO Series
PRODUCT MANUAL
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product
improvement. Some models may be discontinued without notice.
Features
• I/O supported based on industrial Ethernet / Fieldbus serial communication for Smart
Factory
• Sequential multiple I/O distribution control via PLC, Industrial PC, etc.
• Coupler
: Supports a total of 8 different communications
- EtherCAT, CC-Link, ProfiNet, ProfiBus, Ethernet/IP, DeviceNet,
Modbus TCP compatible, Modbus RTU compatible
• Modules
: Various Input / Output Modules, Power Modules
- Remote ABUS/ I/O power, Digital input/output (4/8 CH), Analog input/output (2/4 CH),
Temperature input (4 CH)
- Up to 64 modules can be extended (depending on communication)
• Hot-swap function
: Maintenance and setting can be restored automatically by replacing terminal and
body during operation
• Push-in connection method
: Easy wire connection without tools helps reducing workload
• Expanded user convenience with DAQMaster, a device integration management
program
- Module setting, real time control and monitoring / diagnosis of input / output signal
(except ARIO-C-PN/PB)
- Product selection and placement through virtual mode, offering recommended
sorting
ᜢᜨᜣ
Safety Considerations
• Observe all 'Safety Considerations' for safe and proper operation to avoid hazards.
• symbol indicates caution due to special circumstances in which hazards may occur.
Warning
Failure to follow instructions may result in serious injury or death.
01. Fail-safe device must be installed when using the unit with machinery that may
cause serious injury or substantial economic loss. (e.g., nuclear power control,
medical equipment, ships, vehicles, railways, aircraft, combustion apparatus,
safety equipment, crime/disaster prevention devices, etc.)
Failure to follow this instruction may result in personal injury, fire or economic loss.
02. Do not use the unit in the place where flammable/explosive/corrosive gas, high
humidity, direct sunlight, radiant heat, vibration, impact, or salinity may be
present.
Failure to follow this instruction may result in explosion or fire.
03. Do not disassemble or modify the unit.
Failure to follow this instruction may result in fire.
04. Do not connect, repair, or inspect the unit while connected to a power source.
Failure to follow this instruction may result in fire.
05. Check 'Connections' before wiring.
Failure to follow this instruction may result in fire.
Caution
Failure to follow instructions may result in injury or product damage.
01. Use the unit within the rated specifications.
Failure to follow this instruction may result in fire or shortening the life cycle of the product.
02. Use dry cloth to clean the unit, and do not use water or organic solvent.
Failure to follow this instruction may result in fire or electric shock.
03. When connecting the power input and output, use AWG 22-16 cable and check the
connecting method of crimp terminal.
Failure to follow this instruction may result in fire or malfunction due to contact failure.
04. Keep metal chip, dust, and wire residue from flowing into the unit.
Failure to follow this instruction may result in fire or product damage.
05. Do not connect or disconnect connector (terminal) wire or power, when the
product is operating.
Failure to follow this instruction may result in fire or malfunction of the product.
Cautions during Use
• Follow instructions in 'Cautions during Use' . Otherwise, It may cause unexpected accidents.
• BUS power and I/O power should be insulated by the individually insulated power device.
• Power supply should be insulated and limited voltage/current or Class 2, SELV power supply
device.
• Keep away from high voltage lines or power lines to prevent inductive noise. In case installing
power line and input signal line closely, use line filter or varistor at power line and shielded
wire at input signal line. For stable operation, use shield wire and ferrite core, when wiring
communication wire, power wire, or signal wire. Do not use near the equipment which
generates strong magnetic force or high frequency noise.
• Use the rated standard cables and connectors. Do not apply excessive power when
connecting or disconnecting the connectors of the product.
• Do not touch the module communication connector part of the base.
• Do not connect, or remove the base while connected to a power source.
For removing the terminal, body or base, do not operate units for a long time without it.
• This unit may be used in the following environments.
- Indoors (in the environment condition rated in 'Specifications')
- Altitude max. 2,000 m
- Pollution degree 2
- Installation category II