DCA AQW5.5/10 Manual de instruções - Página 4
Procurar online ou descarregar pdf Manual de instruções para Máquina de lavar roupa de pressão DCA AQW5.5/10. DCA AQW5.5/10 10 páginas.
Imprimir página
SPECIFICATIONS
Rated Flow
Rated Temperature
Rated Power Input
Max. Inlet Pressure
Insulation Level
Sound Power Level
Protection Grade
Rated Pressure
Allowable Pressure
※ Due to the continuing program of research and development, the specifications
herein are subject to change without prior notice.
INSTRUCTIONS FOR OPERATION
Installation of Accessories
Inlet strainer must always be installed to
filter out sand, lime and other impurities
which will damage the pump valve.
1) Insert the handle into the slide cone on
top and fix it onto the body with two
pieces of 4.8 x20 cross screw. (Fig. 1)
5.5 L/min
0~40 ℃
1600 W
7 Bar
Ⅱ
LPA=77dB(A)
IPX5
100 Bar
140 Bar
-5-
2) Place pressure pipe hook in correct position
according to drawing and fix it onto the body
with two pieces of 3.5 X20 cross screw stud.
(Fig. 2)
3) Propel the cleaning pot into the frame in the
middle of handle according to drawing until
clamped, then plug the suction tube of cleaning
pot in to joint on the body, and make it clamped
in the groove at back of handle. (Fig. 3)
4) For initial installation of inlet nut, you should
check whether the filter is mounted into the
machine inlet by the factory or not before
tightening it into the inlet. (Fig. 4)
Connection of High Pressure Water Pipe
1) Aim the high-pressure water pipe at pikestaff valve bush and push inward to complete
the connection. Otherwise press the button and you can dismantle the high pressure water
pipe.
2) Aim the high-pressure water pipe at the machine outlet and rotate clockwise to the
-6-