iHealth PO3 Manual de operação - Página 5

Procurar online ou descarregar pdf Manual de operação para Equipamento médico iHealth PO3. iHealth PO3 8 páginas. Fingertip pulse

USING YOUR PULSE OXIMETER

1. GET THE APPLICATION FOR PO3

The pulse oximeter works with an iPod, iPhone, and iPad. You will first need to

install the application(app). If you have not installed it yet, please proceed as

follows to download the app.

You can download the PO3 app from App Store using the process described

below. Ensure that you have access to the internet.

Launch the App Store and perform a search using the key words "iHealth", "PO3"

to locate the app. Download the appropriate app and then install it.

2. USING WITH iOS DEVICE

STEP 1: Check that your iPod, iPhone or iPad is listed under compatible models.

STEP 2: Check that the iOS is V5.0 or higher. if not, you may need to update your

iOS before using this product.

STEP 3: Open Bluetooth on your iPod, iPhone or

iPad(Setting->General->Bluetooth->on).

STEP 4: Launch the app and login, then the app should connect to the pulse

oximeter, if connect successfully, the app should show the measuring page.

NOTE: When you use app for the first time, you should create new user and

input some personal information.

STEP 5: Open the clamp and place your finger into the rubber opening of the

pulse oximeter(your finger nail should touch the bottom portion), then releasing

the clamp.

STEP 6: Press the button on front panel to turn the pulse oximeter on.

STEP 7: Keep your hands still for the reading. Do not shake your finger during the

test. It is recommended that you do not move your body while taking a reading.

STEP 8: After a few seconds, you can read the data on the app.

STEP 9: When no signal or low signal is detected. the pulse oximeter will power

off automatically in 8 seconds.

3. USING WITHOUT iOS DEVICE

After it has been used for the first time, the date and tme of the pulse oximeter

will be synchronized with the iOS device. The pulse oximeter can also be used