Autonomous Poppin Series Instruções de montagem - Página 3
Procurar online ou descarregar pdf Instruções de montagem para Mobiliário de interior Autonomous Poppin Series. Autonomous Poppin Series 4 páginas. Adjustable height double desk
Imprimir página
8. With a partner, lay the Desk Top (D) upside down on the ground and attach the
Y
Beams using 20 (Y).
X4
Y
Y
9. Attach the
Control Box (F)
to the bottom
of the table
using 2 (Y).
F
X2
Y
F
X4
Y
10. Attach Control Switch (K)
into its corresponding holes
Y1
near the edge of the bottom of
the desk using 2 (Y1).
Y1
Y1
X2
K
11. Connect the Control Box (F) to corresponding
Control Switch (K), and Legs cable (L). Repeat process
with the Desk on other side.
F
L
K
NOTE: Make sure no obstacles are in the desk's path. Make sure cords are a length that
!
will accommodate the change in height.
13. Before use, reset each Control Box following these instructions on both sides.
IMPORTANT! You must RESET the desk prior to use.
Press up and down
buttons at the same
time until it beeps and
goes down to the
lowest level
Release both buttons
and press down button
until exact height
appears on display.
Designed by Autonomous
12. Plug the Power Cable (K) into Control Box (F)
and then into a power outlet. Repeat process with
the Desk on other side.
F
2
A
YOUR DESK IS READY TO USE.
I