Autool BT460 Manual - Página 5

Procurar online ou descarregar pdf Manual para Equipamento de teste Autool BT460. Autool BT460 6 páginas. Auto battery tester

assembly has to be replaced. (Some old vehicle are using external regulator, then

replace the regulator directly.)

Normally, the maximum voltage of regulator is 14.7V. If charging voltage is too

high, the battery will be overcharged, which will shorten battery life and cause

battery failure .

IV: Load Test

In the menu, press UP/DOWN key to select load test. Press ENTER key to load test.

It will show:

Please turn on all the electrical appliance and device

Start engine, and wait for 15 seconds!

Press ENTER key to start load test!

At the same time, start engine. When engine running is stable, press ENTER key to

display test state:

Load Test

Current

Minimum

Minimum when all on

When all appliances are in ON state, normally, charging voltage is more than 12.8V

if the power supply from generator is sufficient. If the voltage is less than 12.8V, it

may be caused by insufficient output current from generator, reduced power

generation, excessive electrical load or leakage. Increasing the electrical appliances

in the vehicle, it will also cause a voltage drop.

V. Language

In the menu, press UP/DOWN to select language setting. Press ENTER key to

language setting. It will show:

Language

BT 460 车辆蓄电池检测仪使用说明书

14.1V

13.5V

12.8V