High Tech Pet Bluefang TX-2 Manual de instalação, funcionamento e formação - Página 2
Procurar online ou descarregar pdf Manual de instalação, funcionamento e formação para Produtos para animais de estimação High Tech Pet Bluefang TX-2. High Tech Pet Bluefang TX-2 9 páginas. Electronic fence
Imprimir página
TX-2 BASE STATION TRANSMITTER
General Description
The Model TX-2 Base Station Transmitter contains numerous advanced
features not found on competing systems. The TX-2 emits a radio signal that
contains a special, digital code. This code must be received and recognized by
the receiver collar before the collar will administer any stimulus to your pet.
The TX-2 weather sealed and is designed for indoor or OUTDOOR use. The
many super advanced features of your TX-2 Transmitter are as follows.
System Status Display
The fully illuminated display panel gives you the complete status of your Base
Station. On the display, the left column tells you the function being
monitored. The middle and right columns tell you the status of that function.
DISPLAY FUNCTIONS:
SYSTEM: This is the overall status of your base station. If everything is functioning
normally the "OK" lamp to the right of the "SYSTEM" lamp will illuminate. If there
is any malfunction, the "FAIL" lamp will illuminate.
BATT: Back-up battery charge indicator. This indicator is only functional if there is
an optional, rechargeable back-up battery installed. When the base station is in
battery mode and the battery has a full charge, the "OK" lamp will illuminate. If
the charge is low the "LOW" lamp will illuminate indicating that the battery is
charging.
LOOP: Continuity of your boundary wire loop. The "OK" lamp indicates that there
is no break and your boundary wire is conducting current in a continuous loop. If
there is a break in your boundary wire, the "LOOP" and "BREAK" lamps will flash
and the audible alarm will sound indicating that the boundary field is not
functioning and needs repair.
POWER: This indicates the power mode, either AC or Back-up Battery. The TX-2
Base Station uses a "smart" power system. If you have the optional Back-up
Battery installed and there is a power failure, the system automatically switches to
battery mode to keep the boundary field energized and your dog contained. In this
mode all indicator lamps flash to conserve battery power. When power is
restored, the system automatically switches back to AC mode and begins
recharging the Back-up Battery. The operating time of the Back-up Battery
depends upon your field strength setting and the length of your boundary wire.
Typical installations will operate for a full day in Battery Back-up mode.
Field Strength Control
You can control the distance from the boundary wire at which the receiver collar
will begin to activate by use of the "FIELD STRENGTH CONTROL" dial. Turning the
dial clockwise increases transmitter output power and therefore, increases field
width. The maximum field width possible will depend upon your particular
installation. It is affected by the depth at which you bury the wire and the total
length of wire used. The greater the wire depth and length, the less maximum
field will be available. Generally, we recommend that you bury your boundary
2
3