Dynastream Innovations ANTUSB-m Stick Ficha de dados - Página 7

Procurar online ou descarregar pdf Ficha de dados para Modem Dynastream Innovations ANTUSB-m Stick. Dynastream Innovations ANTUSB-m Stick 14 páginas.

ANTUSB-m Stick Datasheet

governed by ANT+ Shared Source License. The usage of the Android SDK package is governed by the Apache 2.0

license.

For detailed ANT feature description and message usage, please refer to "ANT Message Protocol and Usage".

1.3

Product Model and Brand

The ANTUSB-m stick is released in black color, unbranded and with a special ANT+ figure mark on the front. The

top side is left blank for customers to print or apply a sticker of their own logos or brand names.

Dynastream offers product customization for volume customers at a cost. The customization includes the choice of

white color and logo or brand printing on top or front. Please contact Dynastream directly for such request.

1.3.1

The top logo area of the USB-m is one of the options for printing. The surface is curved near the end of the stick,

but any distortion of a flat image will be too small to make out under visual inspection

The dimensions for a logo are:

Width: 11mm

Height: 7.1mm for a flat image projected onto the surface (7.3mm after projecting)

Figure 1 Top Logo Area using ANT+ Logo for Illustration

The curvature of the surface is larger near the end of the ANTUSB-m. So this is the area where any stretching of

the image will occur.

The bottom corners do have a large fillet on them (approximately 1.9mm in radius). As such, any logos must take

this into account if it is desired to have the logo off center.

1.3.2

The end logo area is the second location available for branding. It is a gently curved surface facing directly out

when installed in a standard USB port.

Figure 2 Front Logo Area Using ANT+ Figure for Illustration

The dimensions for a logo are: 10.2mm x 3.5mm

Page 7 of 14

thisisant.com