High Torque Hughes 500 Instruções de construção - Página 4

Procurar online ou descarregar pdf Instruções de construção para Brinquedo High Torque Hughes 500. High Torque Hughes 500 4 páginas.

Before painting your model, the area to be painted should be

roughened with 600-1200 grade sand paper to provide a good "key"

for the paint to bond with the Pet-G material.

If there are any holes or gaps these can be filled with polyester

putty and smoothed to give a good finish.

Spray painting is best done with a lacquer that does not contain

solvents, these take a long time to dry. For the best results and

quick drying, the room should ideally be at 25deg C, and the spray

can also heated to 25deg C. For best results a number of thin coats

should be sprayed.

Do not hang the fuselage vertically when painting, place it on a rod,

this reduces the chances of the paint running.

To find different liveries used on the Hughes 500 series of

helicopter, search in Google under "pictures" and search word

"Hughes 500", a number of different colour finishes will be

displayed.

Thank you for your purchase.

We are sure that you will get a lot of enjoyment from your Hughes 500.

H001 Page 4 of 4