AutoPets Feeder-Robot Manual de instruções - Página 13
Procurar online ou descarregar pdf Manual de instruções para Produtos para animais de estimação AutoPets Feeder-Robot. AutoPets Feeder-Robot 19 páginas.
Imprimir página
6.
Remove the Hopper by rotating the Hopper Lock Knob
counterclockwise. Lift the Hopper away from the Base of the unit.
7.
Remove the Dispenser by simply sliding the Dispenser away from
the unit. The rubber Dispenser Flap can also be removed from the
Dispenser for cleaning.
8.
You may hand-wash with mild soap these removable parts: the
Hopper Lid, Hopper Insert, Hopper, Dispenser, Dispenser Flap, and
Food Bowl(s). (See chart on page 22)
877. 250.7729 | feeder-robot.com
24
Hopper Lock Knob
9.
Wipe down non-removable parts that touch pet food with a mild
cleaner: the Food Chute, the Food Bowl Holder, and the Status
Indicator Tower. You may wish to use a small cleaning brush or
toothbrush to clean food debris and residue from the Food Chute
(with Dispenser removed). Test a small area, as some brushes could
scratch plastic parts.
10. Rinse (only removable parts) and let all parts air dry completely before
reassembling the Feeder-Robot. Reinstall the Dispenser, Hopper, and
the Hopper Insert.
11. Plug the Feeder-Robot back in and press the Power button.
12. Add and level out food to the fill line (see page 15), then replace the
Hopper Lid.
Ongoing Maintenance
Fill the Hopper when indicated by the app and/or the solid red Status
Indicator Light at the top of the Status Indicator Tower.
How often you need to fill the Hopper depends on the feeding schedule
of your pet. For an average-sized cat eating 1/2 cup of food per day,
kibble will typically need to be replaced once every 7-8 weeks.
A small- to medium-sized dog may need kibble replaced every 2-4 weeks.
Backup Battery
The Backup Battery provides approximately 24 hours of operation in
power-saving mode if power is interrupted. When power is interrupted,
the unit will automatically switch to battery power and a blinking
yellow light will illuminate the Power button on the Control Panel. The
Feeder-Robot will switch back to household power when it returns,
and the unit will begin recharging the battery.
877. 250.7729 | feeder-robot.com
25