DCI Edge SERIES 5 Manual de instruções de instalação - Página 8

Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento dentário DCI Edge SERIES 5. DCI Edge SERIES 5 13 páginas. Side delivery system
Também para DCI Edge SERIES 5: Manual de instruções de instalação (12 páginas), Manual de instruções de instalação (11 páginas), Manual de instruções de utilização (8 páginas), Manual de instruções de instalação (14 páginas), Manual de instruções de utilização (19 páginas)

Imprimir página
DCI Edge SERIES 5 Manual de instruções de instalação
SERIES 5 DENTAL CHAIR
Installation Instructions

OPTIONAL QUICK CONNECT BOX

ATTACH BOX TO CHAIR
Identify to which side of the chair the box will
1
mount.
Use two 10-32 fasteners to attach the bracket to
2
the Quick Connection Box. Determine orienta-
tion based on the side of the chair to which it will
mount.
Use two 10-32 fasteners to attach to the seat
3
pan casting.
ROUTE LINES
Route wires and tubings out the hole on the side
1
of the Quick Connection Box which is closest to
the chair casting.
Remove the umbilical cover, the wire hanger, the
2
truss cover, and the pump cover, and then route
the wires under the seat casting and into the wire
channel of the truss casting.
CONNECT TO UTILITIES
Connect the power cable to the connector
1
labeled AUXILIARY OUTPUT at the front side
of the transformer box in the chair.
Remove the top cover of the Junction Box in
2
front of the chair and route air and water lines
through the opening at the front of the chair into the
Junction Box. Make air and water connections to the
incoming air and water lines after the regulator.
8