Autoplugin RCP-FM Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Módulos GSM/GPRS Autoplugin RCP-FM. Autoplugin RCP-FM 12 páginas.

Imprimir página

6.4. Indication of

heater operation,

when starting

source is the CIP

(direct or timer

start)

6.5. Indication of

heater operation,

when starting

source is additional

button

6.7. Flashing

frequency for 6.3-

6.5 Setup items

7.3. Notification

Output

signal feed to the

signals

output "Alert_1"

adjustment

7.4. Notification

signal feed to the

output "Alert_2"

7.5. Signal feed to

the output

"Status_Minus"

7.6. Signal feed to

the output

"Status_Plus"

6.4.1 *Off

6.4.2 On

6.5.1 *Off

6.5.2 On

6.7.1 One flash within 3 sec

6.7.2 One flash within 5 sec

6.7.3 * One flash within 10 sec

6.7.4 One flash within 15 sec

7.3.1 *"Heater started"

7.3.2 "Heater stopped"

7.3.5 "Heater started to burn"

7.3.6 "Heating finished

7.3.7 "Error occurred"

7.3.8 Disable the output

7.4.1 "Heater started"

7.4.2 *"Heater stopped"

7.4.5 "Heater started to burn"

7.4.6 "Heating finished

7.4.7 "Error occurred"

7.4.8 Disable the output

7.5.1 Heater operates (potential)

7.5.2 *Heater operates autonomously (from

battery, engine is off) (potential)

7.5.3 Hazard flashers control (double

impulses with the frequency adjusted by 6.7,

applying settings 6.1-6.5)

7.5.4 Engine runs (potential)

7.5.5 Engine runs (RPM impulses)

7.5.6. Ventilation is on during the heater

operation (potential)

7.5.7. Ventilation is off during the heater

operation (potential)

7.5.10. Disable the output

7.6.1 *Heater operates (potential)

7.6.2 Heater operates autonomously (from

battery, engine is off) (potential)

7.6.3 Engine runs (potential)